Powerline Connectors cable crimp

1-24 of 80

Powerline QC cable connectors with crimp termination are Powerlock-compatible Single Pole connectors for professional power distribution up to 750A. The cable is permanently crimped to the contact. This category includes Source and Drain versions for cable sizes from 185mm2 to 300mm2 with different cable diameters and phase colours.

Source is the outgoing side from the power source, for example a generator. Drain is the incoming side of receiving equipment such as a distribution panel or load bank. Source uses an insulated contact tip and Drain a spring-loaded, double-insulated contact sleeve for IP2X finger protection when unmated.

  • Powerlock-compatible Powerline QC connector
  • Maximum current up to 750A
  • Cable sizes from 185mm2 to 300mm2
  • 500 mating cycles minimum
  • IP2X finger protected when unmated
  • IP68 sealed when mated
  • Clip retained contacts - no dowel or cotter pin required
  • Mechanically keyed to prevent connection errors
  • Individual colour coding
  • Multi-louver contact system
  • High Impact Insulators
  • Slide Lock as standard; Fixed Lock available for specific applications
Ten47
Only on stock